Wednesday, February 10, 2021


 Greg had a new pin machined without the load cell. This will give us time to repair the original pin and electronics.

Saturday, February 6, 2021


 The cylinder is now in Mussafah and been revised. All the rubber joints need to be replaced, it is quite clear what the problem was.  The cylinder and piston are good. The rod is a bit scratched but will be polished.

Tuesday, February 2, 2021

Headstay cylinder pin out



 In order to remove the hydraulic cylinder pin Greb had a rig built and with the mast jack he pushed out the pin. The cylinder is now free and can be serviced.